(978)686-6332 sales@nedc.com

极速飞艇注册

极速飞艇技巧

Custom Die Cutting is NEDCs core competency. We offer custom die cutting through steel-rule dies. This enables us to offer essentially unlimited customization. This is because we can provide a steel-rule die with specific shapes, cut-outs, and diameters along with the ability to cut a specific material. Since these shapes, sizes, and materials are essentially endless our ability to produce custom gaskets, thermal pads, absorbers, and epoxy films are also endless.

极速飞艇开奖走势图

custom die cutting parts

Array of Die Cut Parts

The modern way to “die cut” is to take advantage of all the uses of the steel rule die. The steel rule die is essentially a piece of durable wood such as maple that has “rule” in it; one side of the rule is sharpened. This steel rule is bent into the shape of the part and placed into the wood to create a tool that is very durable. The steel rule offers an economical solution to manufacture a quality product for large-scale runs. These steel rule dies “die-cut” hundreds of different shapes, and sizes of parts that range from extremely complex to very simple. One of the biggest benefits of dies is their durability, and their low cost. Some dies can be good for a million hits or more depending on the material.

The equipment is all that is needed to manufacture a quality part. A die-cutting machine comes down with enormous pressure, and precision to “burst” the die through the material.  Modern die-cutting machines offer computer algorithms and lightning fast die cutting ability. Our modern die-cutting machines utilize coordination of computers, hydraulics, and nesting software to offer our customers the best price. Part of custom die cutting is the ability to match our customers needs to what our machines and tooling can do.

极速飞艇怎么玩的

One of the advantages of die-cutting is the reproducibility of every cut. The part is made by the die, and the die is naturally stronger than the material itself, so it helps in producing a quality part over and over. The shape of the part is dictated by the rule of the die which stays in place due to the wood and the pressure of the machine that is being used. Nearly every cut is within a few thousandths of the last cut. One of the limitations of the steel-rule die is the tolerance. Steel-rule dies can be manufactured to hold a +/- .005” tolerance. However, it may be difficult to stay within that tolerance on a very complex part such as extremely thick foam materials or extremely dense materials.

Concavity, or hourglassing is a common phenomenon known to die-cutters. Luckily, NEDC offers a solution to this problem as well, (see Waterjet Cutting). It is also possible to hold a +/- .002” tolerance with a solid tool on select parts; NEDC provides solid tool cutting as well. Solid tools can have a prohibitively expensive cost if not cutting a lot of pieces. Die cutting normally offers a two-dimensional part (X and Y axis); it is possible to offer some parts as three-dimensional, through bends. This is rare but can be done with some rigid, thin materials. Die Cutting also offers the ability to “kiss-cut,” this is described in our article on “Kiss-Cut Parts“.

极速飞艇几点开始

It is possible to manufacture a die with more knife bent into the configuration to make more parts with each ‘hit’. This is done often when there are many parts required. It is also helpful when nesting the part may offer a more effective price structure for our customer. It is normal for the price to go up on the tool when there are more parts offered per ‘hit’. When we add more cuts per hit, we call the tool a higher “up”. For example, that die, is 10-up meaning with every hit, it cuts 10 parts. NEDC offers die cutting for quantities ranging from very high such as 1,000,000 pcs to 1 pc.

极速飞艇遗漏

NEDC now offers a large variety of high-performance materials that may be die cut. These materials include silicone, fluorosilicone, nitrile rubber, EPDM rubber, electrically conductive gasketing materials, thermal management, as well as many other types of materials (see our products list).  Some of the parts NEDC has the capability to die-cut are gaskets, thermal pads, epoxy preforms, and absorbers. Of course with custom die cutting, NEDC offers a wide array of materials to be die-cut.

Another bonus of modern custom die cutting is the ability to offer pressure sensitive adhesive on the back of parts with ease of removal. There are many types of adhesive backing that can be provided with a part. These tapes can be acrylic-based, rubber-based, or silicone-based. This oftentimes depends on the application. NEDC is an authorized converter of 3M. For that reason, we offer many different types of adhesives on the back of its parts:

  • Thin Films such as Nylon, Mylar®, ETFE, PTFE, and DuPont’s Kapton®.
  • Adhesives, such as the wide range 3M offers: VHB Tapes, Acrylic Transfer Tapes, Double Sided Tapes, and more.
  • Fabrics such as Felt
  • Thin Foils such as Copper Foil, Aluminum Foil and others.
  • Aramid paper Products such as DuPont’s Nomex®

For more details on the materials available for NEDC to procure, see our Tech Blog.

极速飞艇官方开奖

We thought since our main selling point is die-cutting, we would also present examples where conventional die cutting does not make sense. There are situations where die cutting does not make sense, such as mentioned above with concavity issues on thicker materials. Below we list a few reasons where it makes sense to hunt for alternative to die-cutting.

A. Its a thicker material. Concavity can be a concern with thicker materials. There are tricks of the trade to get around this to a certain degree, but ultimately it may be more wise to accept the material is too thick to die-cut.

B. Tolerancing. Tolerancing can be a tricky challenge, depending on the size of the part, and the cut-outs and tolerancing of those shapes, sometimes it makes more sense to move to another type of fabrication method, such as laser cutting, or waterjet cutting.

C. Many Cut-Out Shapes. There are times when literally hundreds of cut-outs are in a part. This can become tricky because die-cutting ultimately is a somewhat unbalanced manufacturing method. Two surfaces come together to force the die to burst through the material. For that reason, not all the surfaces perfectly burst at the same time. When many cut-outs are on a part, pressure, and getting a good part consistently may become a challenge.

极速飞艇人工计划公式

NEDC(New England Die Cutting) is a custom die cutting manufacturer in Methuen, MA with a 77,000 sqft facility. If you have any questions concerning custom die cutting or our die-cutting process please contact our Sales Team at sales@nedc.com.

Die Cutting Blog
Previous Posts

极速飞艇平台

It is not often you hear someone say they have a “favorite tape”. However...

read more

极速飞艇开奖结果时间

NEDC die-cuts a lot of different types of materials. I often say a...

read more

极速飞艇现场开奖直播

At NEDC, we cut a lot of custom parts. However, it is much more common to...

read more
Sil- Pad 800 AKA SIL PAD TSP 1600 | Die-Cutting

极速飞艇开奖记录网

Sil-Pad 800 is a thermally conductive pad that belongs to the Sil-Pad family. It is a thermally conductive silicone rubber that is reinforced with a fiberglass carrier. It is electrically isolating while also having a compliant surface conducive to use in both high,...

Sil-Pad 400 AKA SIL PAD TSP 900 | Die-Cutting

极速飞艇计划网

When we are talking about Sil-Pad products, one of my favorites is Sil-Pad 400. Sil-Pad 400 is also known as SIL PAD TSP 900 now. It sounds weird to say, but the refined feeling of the gray silicone pressed into the fabric produces a uniform feeling across the pad...

GAP PAD 1500 aka GAP PAD TGP 1500 | High-Compliance Pad | Die-Cutting

极速飞艇人工计划

At NEDC, Gap Pads/Thermal Pads are a core product. One uncommon type of material in the thermal pad world is an unreinforced pad. Normally, thermal pads are reinforced to aid with handling. It is unusual for a thermal pad to have enough continuity to be easy to handle...

3M ISOLOSS™ Uses | Waterjet Cutting | Custom Die Cutting

极速飞艇分析软件

At NEDC, we manufacture custom gaskets all day. One material we use to cut custom gaskets is polyurethane foam. Polyurethane foam is very popular for gap filling, gasketing, and shock absorbing applications. ISOLOSS™ is made by a 3M subsidiary E-A-R. Properties of LS...

High-Strength Silicone Rubber Gaskets

极速飞艇开奖号码

At NEDC, we cut lots of gasketing materials. Silicone rubber is a go-to choice for a lot of our customers. The reasoning for this is plenty: Reasons to Use Silicone Rubber Gaskets Its high-temperature/low temperature resistant properties. It has anti-stick properties...

Silicone Rubber Gasketing Material  | A-A-59588 Class 2A/2B

极速飞艇开奖计划

I thought I’d make a blog about the material any good gasket maker should recognize off the top of their head. That gasket material would be the current A-A-59588 Class 2A/2B. Everytime I see these materials, I smile because I know that there's a good chance we have...

GAP PAD TGP HC3000 aka Gap Pad HC3.0, Die-Cut, Custom Cut Shapes

极速飞艇单双

Whenever a customer comes to me looking for a middle of the road option available in today's world, that is:  -Soft & Compliant -Low Outgassing -Available in many thickness options -Economical yet good thermal properties I will look towards Gap Pad HC3.0 aka GAP...

EVs(Electric Vehicles) & Thermal Pads

极速飞艇开奖预测

In February, I just took possession of an electric vehicle. It got me thinking, electric vehicles use a lot of thermal interface material, don’t they? Batteries are the life, and blood of electric vehicles. They control the entire car; air conditioning, heating,...

Henkel Announces New Ultra-Low Modulus Product | GAP PAD TGP 12000ULM

极速飞艇计划

Henkel has launched the Gap Pad TGP 12000ULM under their Bergquist product line. This silicone material is filled with thermally conductive particles to impart the highest thermal conductivity to date of 12 W/m-K. This is an exciting development for the Gap Pad...

Thermal Pad/Choosing a Thermal Pad – Case Study

极速飞艇开奖号码查询

In our last blog, we discussed 3 tips to choosing a thermal gap filling pad. We wanted to show how that worked in a previous application. The below is a case study that utilizes a few of those tips.  The Problem: A customer came to us looking for an thermal management...

3 Tips for Selecting a Thermal Gap Filler Pad!

极速飞艇官网

Many of our customers are using thermal pads nowadays. With another year in the books, the electronics used this year are at an all-time high. This requires more cooling! To finish off the year, we thought we would make a blog about a few tips on choosing a thermal...

What do we make at NEDC?

极速飞艇全天计划

A lot of times when I’m explaining to someone what I do for a living, I almost feel like saying “I play with giant cookie cutters all day.”  We Use Giants Cookie Cutters, why say this? To most people it seems hard to explain that our customers just send me a print and...

All of the information presented above is believed to be factual and accurate; however, NEDC is not liable for any design or application utilizing this information.

New England Die Cutting

Popular Blog Posts

极速飞艇结果走势图

NEDC has been die-cutting thermal pads since its inception in 1982. One of the more popular products Sil-Pad 900S by Henkel’s Bergquist. It is one of the most commonly die-cut materials NEDC converts. This product is part of the Sil-Pad family, featuring great thermal...

©New England Die Cutting 2022

极速赛车开奖官方 澳洲10彩开奖 澳洲10全天一期计划 SG赛车开奖直播下载 澳洲8在线投注 极速赛车官方开奖查询 澳洲5号码走势图