(978)686-6332 sales@nedc.com



Waterjet Cutting PSA-backed Neoprene Gasket

Waterjet Cutting PSA-backed Neoprene Gasket

NEDC operates only with state-of-the-art equipment that can handle a wide variety of materials. One of the most sophisticated machines NEDC owns is our Waterjet Cutters. The Waterjet cutting happens through a very unique process. The process starts with a high-powered pump that creates a lot of pressure for the water. The water then exits the head of the waterjet through a premounted sapphire/diamond orifice. All of this action produces an extremely powerful waterjet stream that is forced from the head at incredible speeds, (30,000-50,000psi). This streams pierces the gasketing material creating a clean cut with the most available commodity on the planet, water. The waterjet cutting process allows parts to be nested in a very economical fashion. NEDC is a leading waterjet cutting supplier for gaskets, insulators, and other elastomeric products.


Foam or Sponge gaskets are also cut with our waterjet machine. These materials can be flexible and cause issues in conventional die-cutting. This is due to the elastic nature of these materials; causing the material to snap-back into an hourglass like shape. However, with a waterjet focusing on one hole/feature/cut at a time, meeting tolerance requirements becomes easier.


At NEDC, the main function of our waterjet is used to cut solid gaskets. These gaskets can range from nitrile rubber, to neoprene rubber. The reason we do this is because typically when our customer is looking for a few gaskets, we can make them quickly and accurately on our waterjet. It also helps us dial in tight tolerances. Some of these materials include neoprene, fluorosilicone, silicone, nitrile, EPDM, or other conventional rubber materials.

Advantages of a Waterjet Cutting Machine:

  • Extremely Accurate Cuts of Complex Parts
    Waterjet cutting offers an incredible amount of accuracy through a coordination of computer software and tight controls. Tolerance can be held as +/- .002” on some materials.
  • Maximizes Yield of material through nesting software
    Parts can be easily nested to offer our customer the best price possible. In some situations, when a part has a very unique geometry, sometimes the way it may be nested is not quite as linear as a simple horseshoe like part. In these cases, waterjet machines are able to flip, turn, and match the shape in many different directions utilizing every inch of material.
  • No tool investment is necessary for water jet cutting
    No tool is needed to be made, the DXF is the tool! Please provide an electronic file to aid in programming/cutting. This saves time and money because this file is cut to your specifications.
  • Quick Prototypes
    At NEDC, we strive to provide prototypes quickly. Waterjet Cutting offers the advantage of the customer being able to engineer the part through their DXF and see what the part will look like in production. The benefit of creating a DXF gives a side benefit of being able to move into production in a much quicker fashion by reducing the time between each prototype rendition. No tool is required to be created, so parts can be cut extremely fast.
  • Cut parts from CAD/DXF files, to ensure perfect accuracy of every cut, every time. High degree of repeatability 
    The DXF is executed by the software in the waterjet cutting machine. When cutting with a DXF file, you can guarantee that no tool will wear/abrade. The waterjet stream itself is always offering a consistent water stream that makes each part nearly identical to the last. This makes reproducibility a huge asset for the machine.
  • Allows materials to be cut without the typical compression of conventional die-cutting
    Die-Cutting thick foam/sponge materials can result in concavity because of the “burst” action of the die; with a waterjet it is possible to avoid this compression distortion because the waterjet is not compressing the material in the way a conventional die cutting operation would. The difference is, it is slicing through the material in a vertical direction.
  • Size of gaskets/parts has little limitations
    Cutting gaskets has nearly no limitations when it comes to custom. However, size becomes a concern the bigger the gasket becomes. With waterjet cutting, the only limitation becomes the size of the bed of the waterjet itself. With that said, NEDC has cut 7 foot gaskets before on its waterjet machine.

Limitations of a Waterjet Machine

  • Size of parts have limitations

While we just said above that bigger gaskets are easier to cut with a waterjet- as it gets smaller, it may become more difficult. This is because the waterjet stream has a size too, and that starts to limit the features it can cut with accuracy. If the stream and the feature become competitive in size, it can become a challenge.

  • Amount of parts being cut

While waterjet cutting is pretty quick, the amount of parts being cut can become a challenge because as mentioned above, cutting with a waterjet only works on one feature at a time. This is in comparison to die-cutting that cuts everything all at once. This is one of the tradeoffs when using a waterjet cutting machine. This drawback generally falls under speed of the overall process.

  • Some materials just do not work

Some materials just do not cut well on a waterjet. Fibrous, or otherwise paper like products generally have a tough time cutting because either they soak up the water or they explode when cutting them. It is wise to consult with an experienced waterjet operator before asking a part to be waterjet.

If you have a gasket/part that you believe could be waterjet cut, please send your question or drawing to sales@nedc.com. NEDC has experienced waterjet operators that understand what the machine can do well.

Waterjet Cutting Blog
Previous Posts


It is not often you hear someone say they have a “favorite tape”. However...

read more


NEDC die-cuts a lot of different types of materials. I often say a...

read more


At NEDC, we cut a lot of custom parts. However, it is much more common to...

read more
Sil- Pad 800 AKA SIL PAD TSP 1600 | Die-Cutting


Sil-Pad 800 is a thermally conductive pad that belongs to the Sil-Pad family. It is a thermally conductive silicone rubber that is reinforced with a fiberglass carrier. It is electrically isolating while also having a compliant surface conducive to use in both high,...

Sil-Pad 400 AKA SIL PAD TSP 900 | Die-Cutting


When we are talking about Sil-Pad products, one of my favorites is Sil-Pad 400. Sil-Pad 400 is also known as SIL PAD TSP 900 now. It sounds weird to say, but the refined feeling of the gray silicone pressed into the fabric produces a uniform feeling across the pad...

GAP PAD 1500 aka GAP PAD TGP 1500 | High-Compliance Pad | Die-Cutting


At NEDC, Gap Pads/Thermal Pads are a core product. One uncommon type of material in the thermal pad world is an unreinforced pad. Normally, thermal pads are reinforced to aid with handling. It is unusual for a thermal pad to have enough continuity to be easy to handle...

3M ISOLOSS™ Uses | Waterjet Cutting | Custom Die Cutting


At NEDC, we manufacture custom gaskets all day. One material we use to cut custom gaskets is polyurethane foam. Polyurethane foam is very popular for gap filling, gasketing, and shock absorbing applications. ISOLOSS™ is made by a 3M subsidiary E-A-R. Properties of LS...

High-Strength Silicone Rubber Gaskets


At NEDC, we cut lots of gasketing materials. Silicone rubber is a go-to choice for a lot of our customers. The reasoning for this is plenty: Reasons to Use Silicone Rubber Gaskets Its high-temperature/low temperature resistant properties. It has anti-stick properties...

Silicone Rubber Gasketing Material  | A-A-59588 Class 2A/2B


I thought I’d make a blog about the material any good gasket maker should recognize off the top of their head. That gasket material would be the current A-A-59588 Class 2A/2B. Everytime I see these materials, I smile because I know that there's a good chance we have...

3 Tips for Selecting a Thermal Gap Filler Pad!


Many of our customers are using thermal pads nowadays. With another year in the books, the electronics used this year are at an all-time high. This requires more cooling! To finish off the year, we thought we would make a blog about a few tips on choosing a thermal...

What do we make at NEDC?


A lot of times when I’m explaining to someone what I do for a living, I almost feel like saying “I play with giant cookie cutters all day.”  We Use Giants Cookie Cutters, why say this? To most people it seems hard to explain that our customers just send me a print and...

Outgassing of Thermal Pads | ASTM E595 | TML & CVCM


One of our tips for selecting a thermal pad is selecting a thermal pad that has a lot of data about it. Some of these data points include, thermal conductivity, volume resistivity, flame rating, Young's Modulus, and more. However, one common question when it comes to...

Sponge/Foam Rubber Blends | Die-Cut, Waterjet-Cut, Lamination


Closed Cell Sponge/Foam rubber materials have a place in the industry. Oftentimes they are used in applications where either for vibration dampening, or gasketing where not much compression force is available. However, there are also times where the environmental...

ITW Formex | Die-Cut/Laser-Cut Parts | Scored, Formed, Bent, Cut


Electrically Insulating materials are a common die-cut product here at NEDC. One of the more common materials we use is ITW Formex. These insulating plastic materials are used in a number of electrically isolating applications. They are flame retardant, and are...

Reinforced Silicone Rubber Gaskets | Silicone Solid, Sponge Rubber


One of the issues in die-cutting is what we call “thin walls” this occurs when there is a hole close to the wall of a part. We typically implore our customers to allow for “break-out” if possible. However, when a gasket is reinforced, it can make this problem easier...

All of the information presented above is believed to be factual and accurate; however, NEDC is not liable for any design or application utilizing this information.

New England Die Cutting

Popular Blog Posts


NEDC has been die-cutting thermal pads since its inception in 1982. One of the more popular products Sil-Pad 900S by Henkel’s Bergquist. It is one of the most commonly die-cut materials NEDC converts. This product is part of the Sil-Pad family, featuring great thermal...

©New England Die Cutting 2022

澳洲幸运5计划网 SG飞艇在线走势图 澳洲幸运8公式 澳洲10开奖结果大小 快乐飞艇计划 极速赛车开奖软件下载 极速赛车几点开始 秒速飞艇走势图开奖号码